Finescrollsaw

012 - Munich wall clock

This is an elaborate wall clock in gothic style. I have rendered it with linen behind the fretwork for better viewing of the forms. However, at least the front piece should be left free of linen in order to see the clock pendulum through. Of course the clock admits many of the clock inserts available in the market.

The clock is designed to be made with 1/4 inches wood or with 6 mm wood. The following table gives the dimensions of the clock depending on the wood thickness you use:

	Clock height	Clock depth	Clock width
1/4 in. wood	31.6 in.	6 in.	12.8 in.
5 mm wood	63.1 cm	12 cm	25.6 cm
6 mm wood	75.8 cm	14.4 cm	30.7 cm

Please note that this pattern is registered and copyrighted. If you would like to have it I offer it for 10 € plus shipping. The pattern is computer made, which provides total precision, and nicely printed for convenient scrolling. Please write me to [email protected] to buy this pattern or for any questions.

This picture is courtesy of Manuela "spring" from Sydney, Australia.


This picture is courtesy of Carmine Dorio from Italy.	This picture is courtesy of Alfonso Madueno from Spain.	This picture is courtesy of Isaac Arditi from Israel: "As usual I must keep telling you how much the project is nice and delicate".


This picture has been sent by Michel Susanne from Belgium.	This picture has been sent by Jose Luis Tellez from Celaya (Guanajuato, Mexico).	This picture has been sent by Santiago Fernandez from Barcelona, Spain.	This picture has been sent by William Butler from thte USA: "I used a deep purple linin behind the fretwork. And Stained some pieces for effect. (I used the inspiration from the piece from Mexico). I used Grey Ash, with lemon oil and a spray laquer satin finish."


This picture has kindly been sent by Valeriy Elizarov from Vilyuchinsk, Russia.	This picture has kindly been sent by Eusebio Vegas from Spain.