|
A
gracefully shaped fancy mirror frame presided over by a protruding
grotesque face that seems to watch down with attention. The frame is
completed with a magnificent ornamentation of leaves.
The frame is
formed by four pieces that fit together by means of dovetail joints.
The careful computer restoration assures that these joints will fit
with extreme accuracy. This type of design permits making a quite
big mirror frame with just a scroll saw. The joints are then
covered by some ornamental pieces and the grotesque itself. The use
of contrasting wood colours, very dark in the rear and clear for the
fretworked pieces creates a staring effect in the finished mirror.
The
mirror frame is designed to be made with 1/4 inches wood or with 6
mm wood. It can be scaled to use other wood thickness as well. The
following table gives the dimensions of the frame depending on the
wood thickness you use:
|
Mirror height |
Mirror width |
|
1/4 in. wood |
27 in. |
15.6 in. |
|
6
mm wood |
64.9 cm |
37.5 cm |
Please note that this pattern is registered and copyrighted. If you would like to have it I offer it for 11 € plus shipping.
The pattern is computer made, which provides total precision, and nicely printed for convenient scrolling. Please write me to
[email protected] to buy this pattern or for any questions.
This picture has been kindly sent by Renato Zanoni from Italy.
|
